Buying Guides · ažurirano 2026-11-19
Hikvision and Dahua IP Cameras: First Setup and Activation
Why a New Professional Camera Needs Setting Up First
Consumer Wi-Fi cameras are designed to be scanned with a phone and forgotten. Professional PoE cameras from Hikvision and Dahua work differently. They arrive in an inactive or uninitialised state with no password, and you must set one before the camera will stream video or record. This is a security measure. It stops cameras going live on a network with a factory login that anyone could guess.
The process is straightforward once you know the order. This guide covers what you need, how to activate the camera, how to find it on your network, how to add it to a recorder and phone app, and which settings to check before you leave the ladder for good. The dark, cold months are a good time to do the activation indoors on a desk rather than at the top of a wall.
What You Need Before You Start
- Power for the camera. This can be a PoE port on an NVR, a PoE switch or a PoE injector. Some models also accept a 12 V DC adapter.
- A network connection. The camera and your computer must be on the same local network, for example plugged into the same router or switch.
- A Windows or Mac computer with a modern web browser. Alternatively, a recorder of the same brand with a monitor attached.
- The manufacturer's discovery tool. For Hikvision this is SADP. For Dahua it is ConfigTool. Both are free from the official websites.
- The label on the camera. It usually shows the serial number, a QR code and, on many Hikvision models, a verification code. Photograph it before mounting, because labels are hard to read once the camera is on the wall.
Our tip is to set up every camera on the bench first. Mount it only once you know it works and you have noted its password and IP address.
Step 1: Find the Camera on Your Network
Connect the camera, wait a minute or two for it to boot, then run the discovery tool.
Hikvision: SADP
SADP scans your local network and lists every Hikvision device it finds. The list shows the model, IP address, firmware version and status. A new camera appears as Inactive. Depending on the model and firmware, it will either have picked up an address from your router via DHCP or be using a factory default address. On many models that default is 192.168.1.64.
Dahua: ConfigTool
ConfigTool does the same job for Dahua devices. A new camera shows as uninitialised. Dahua's commonly used factory address is 192.168.1.108, although DHCP may assign a different one.
If the camera's address is in a different range from your home network, you will not be able to open it in a browser yet. Activate it first, then change its IP settings in the same tool so that it matches your router's range. Most home routers use 192.168.0.x or 192.168.1.x.
Step 2: Activate and Choose a Strong Password
Select the camera in SADP or ConfigTool and choose the activate or initialise option. You can also do this by entering the camera's IP address in a browser.
- Use a password of at least eight characters that mixes upper and lower case letters, numbers and symbols. The camera will refuse weak passwords.
- Avoid reusing your email or Wi-Fi password.
- Store it in a password manager or another safe place. Forgotten passwords are the most common support problem with professional cameras.
- Set up the password recovery options if offered, such as security questions or a reserved email address. Reset procedures vary by model and firmware. Without these options, a reset can be awkward.
Dahua may also ask you to choose a region and video standard during initialisation. Choose PAL for Europe. Then set the IP address. Many installers prefer a fixed (static) IP for each camera so that addresses never change after a router restart. If you do this, pick addresses outside your router's DHCP pool.
Step 3: Connecting to an NVR
If you are using a recorder of the same brand, the job is often easier. Cameras plugged directly into the NVR's built-in PoE ports are usually detected automatically. Many NVRs can also activate new cameras with a password you set on the recorder. The NVR then gives each camera an address on its own internal network, and you do not need a computer at all.
If the cameras are connected through a separate PoE switch, the NVR finds them on your main network instead. Either activate them first with SADP or ConfigTool, or let the NVR activate them. Then add them in the recorder's camera management menu.
A few points to watch:
- Check that the camera password matches what you enter on the NVR. A mismatch is the usual reason for a "user name or password error" status.
- If you mix brands, add the camera using ONVIF. Some cameras require you to create a separate ONVIF user in their settings first.
- Check the PoE power budget of your switch or NVR. Cameras with heaters, motorised lenses or PTZ functions draw more power. A camera that keeps rebooting is often short of power.
Step 4: Viewing on Your Phone
Hikvision uses the Hik-Connect app and Dahua uses DMSS. Both use a cloud relay service, so you can watch remotely without opening ports on your router.
- Enable the cloud or platform access in the camera or NVR settings. On Hikvision this is usually under network or platform access. On Dahua it is the P2P option.
- Create an account in the app and scan the QR code shown on the device label or in its settings menu.
- For Hikvision, enter the verification code when asked. This code is used to encrypt the video stream.
- If you have an NVR, add the NVR to the app rather than each camera. All channels then appear under one device.
If a household needs access, use the app's sharing feature rather than giving out the admin password.
Step 5: Settings to Check Straight Away
Once the camera is running, spend ten minutes on these basics:
- Date, time and time zone. Select the correct zone (Tallinn, Helsinki, Riga and Vilnius are on EET), enable NTP time sync and check that daylight saving changes are applied. Accurate timestamps matter if footage is ever needed as evidence.
- Firmware. Compare the version with the latest on the manufacturer's site, and update only with firmware intended for your exact model and region.
- Video stream. Choose the resolution, frame rate and codec (H.265 saves storage if your recorder supports it).
- Detection. Set up motion or smart detection, drawing zones that exclude roads, trees and neighbours' property.
- Storage. Format any microSD card in the camera before use and confirm that recording is scheduled.
- Security. Disable UPnP and services you do not use, and create a separate lower-privilege user for everyday viewing.
Common First-Setup Problems
The camera does not appear in SADP or ConfigTool
Check the PoE link light on the switch and try a different cable. Make sure your computer is wired into the same network. Computers on a guest Wi-Fi network or behind a VPN often cannot see the camera. Firewalls can also block discovery, so allow the tool through when prompted.
The browser shows no live image
Older firmware may need a browser plug-in, while newer firmware generally supports plug-in-free live view. Try a different browser, or use the desktop clients Hik-Central/iVMS-4200 for Hikvision or SmartPSS for Dahua.
The image appears, but recording does not
Check the recording schedule, the hard drive or card status and whether the disk has been initialised.
You have forgotten the password
Use the recovery method you set during activation. If none is available, contact your supplier or the manufacturer's support. Do not try random "master reset" tricks from forums.
Conclusion
Hikvision and Dahua cameras take a few more minutes to set up than plug-and-play consumer models. In return, you get a system that is secure from the start and has dependable recording and flexible settings. The order is simple: find the camera, activate it with a strong password, give it a sensible IP address, add it to your NVR or app, and check time, firmware and detection. If you do the setup on the bench before mounting, the installation itself becomes the easy part.
Zatražite ponudu za ugradnju Prikaži sve: HIKVISION kamere →
Buying GuidesNadzorne kamere na mobitelu: vodič za postavljanje aplikacije
Buying GuidesOdlazite za Božić? Provjerite sigurnosne kamere prije puta
Buying GuidesHikvision i Dahua tehnologije objašnjene: ColorVu, WizSense