
Shelly Pro 2 - for DIN rail mountable two-channel smart switch
Shelly Pro 2 is a DIN-rail mounted 2-channel smart switch with potential-free (dry) contacts.
54,69 € bez DPH
Cena je včetně DPH · Doprava: Česko od 7,01 € · doručení po celém světě s DHL Express
Kupujete více kusů nebo potřebujete kompletní řešení? Poptat projektovou cenu →
- Vrácení do 14 dnů
- Záruka 24 měsíců
- Bezpečná platba
- Pomoc odborníka s výběrem
- Obchodník z EU, bez cla
- Zaplaťte později s Klarna
- Recenze na Trustpilotu
Shelly Pro 2 - DIN Rail Mount Dual-Channel Smart Switch
Device identification-
Device name: Shelly Pro 2 v.1
-
Device model: SPSW-202XE16EU
-
Device SSID: ShellyPro2-XXXXXX
Short description
Shelly Pro 2 is a DIN rail mountable 2-channel smart switch with potential-free contacts. Thanks to the flexibility of its Gen2 firmware and LAN connectivity, it gives professional installers more options for end-user solutions. The device can work standalone on a local Wi-Fi network or via the cloud with home automation services.
Shelly Pro 2 can be accessed, controlled and monitored remotely from anywhere with an internet connection, as long as the device is connected to a Wi-Fi router and the Internet.
Shelly Pro 2 has a built-in web interface that can be used to monitor and control the device and adjust its settings.
Main applications
-
Residential
-
MDU (multi-dwelling units – apartments, hotels, etc.)
-
Small businesses (offices, shops, restaurants, petrol stations, etc.)
-
Government/municipal
-
University/college
Integrations
-
Google
-
Alexa
-
Samsung SmartThings
Device electrical interfaces
Inputs
-
2 switch/button inputs on screw terminals: SW1 and SW2
-
2 power supply inputs on screw terminals: 1 N and 1 L
-
2 relay inputs: I1 and I2
Outputs
-
2 relay outputs: O1 and O2
Ethernet port
-
1 RJ45 connector
⚠WARNING! Connect or disconnect the LAN cable only when the device is powered off! The LAN cable connector must not have any metal parts that the user touches when connecting or disconnecting it.
Add-on interface
-
Shelly proprietary serial interface
⚠WARNING! High voltage on the add-on interface when the device is powered on!
Connectivity
-
Wi-Fi
-
Ethernet
-
Bluetooth
Safety features
-
Overheating protection
Supported load types
-
Resistive (incandescent bulbs, heaters)
-
Capacitive (capacitor banks, electronic devices, motor start capacitors)
-
Inductive with RC snubber (LED light sources, transformers, fans, refrigerators, air conditioners)
Inputs
-
One dome button
-
Press and hold for 5 s to reboot
-
Press and hold for 10 s to reset to factory settings
-
Outputs
-
LED indicators
-
Power (red): on when power is connected
-
Wi-Fi (variable):
-
Blue: in AP mode
-
Red: in STA mode and not connected to a Wi-Fi network
-
Yellow: in STA mode, connected to a Wi-Fi network but not connected to Shelly Cloud or cloud service disabled
-
Green: in STA mode, connected to a Wi-Fi network and Shelly Cloud
-
Flashing red/blue: OTA update in progress
-
-
LAN (green): LAN connected
-
Out 1 (red): relay 1 closed
-
Out 2 (red): relay 2 closed
-
Technical specifications
Physical
-
Size (HxWxD): 94x19x69 ±0.5 mm
-
Weight: 76 g
-
Mounting: DIN rail
-
Screw terminals max. torque: 0.4 Nm
-
Wire cross-section: 0.5–2.5 mm² (green), 0.5–1.5 mm² (blue)
-
Wire strip length: 6–7 mm (green), 5–6 mm (blue)
-
Enclosure material: Plastic
-
Colour: Grey
Environmental
-
Temperature: -20 °C to 40 °C
-
Humidity: 30% – 70% RH
-
Max altitude: 2000 m
Electrical
-
Supply voltage AC: 110–240 V
-
Supply voltage DC: N/A
-
Power consumption: <3 W
-
Neutral not required: No
Output circuit ratings
-
Max switching voltage AC: 240 V
-
Max switching voltage DC: N/A
-
Max switching current AC: 16 A per channel, 25 A total
-
Max switching current DC: N/A
Sensors, meters
-
Internal temperature sensor: Yes
Radio
-
RF frequency: 2400–2495 MHz
-
Max RF power: <20 dBm
-
Wi-Fi protocol: 802.11 b/g/n
-
Wi-Fi range: up to 30 m indoors, 50 m outdoors (depending on local conditions)
-
Bluetooth protocol: 4.2
-
Bluetooth range: up to 10 m indoors, 30 m outdoors (depending on local conditions)
MCU
-
CPU: ESP32-D0WDQ6
-
Flash: 8 MB
Firmware capabilities
-
Schedules: 20
-
Webhooks (URL actions): 20, with up to 5 URLs per hook
-
Scripting: Yes
-
MQTT: Yes
-
CoAP: No
Legend
-
I1, I2 – load circuit input terminals
-
L1(A) – load circuit 1 live (110–240 V)
-
O1, O2 – load circuit output terminals
-
L2(B) – load circuit 2 live (110–240 V)
-
SW1, SW2 – switch/button input terminals
-
L3(C) – device power supply live (110–240 V)
-
L – live
-
N – neutral
-
LAN – RJ45 LAN connector
| Kód produktu | K000564 |
|---|---|
| Kód výrobce | SPSW-202XE16EU |
| Značka | Shelly |
| Stav | Nové |
| Záruka | 24 měsíců |
Zatím žádné recenze. Hodnotit mohou pouze kupující tohoto produktu – odkaz zasíláme e-mailem po doručení.
| Výdejní box Smartpost (Itella) | 2,55 € |
|---|---|
| Výdejní box Omniva | 3,10 € |
| Výdejní box DPD | 2,60 € |
| Pošta Omniva | 8,68 € |
| Kurýr DPD | 6,82 € |
| Výdejní box nebo výdejní místo | podle země a hmotnosti |
| Kurýr | podle země a hmotnosti |
| Kurýr DHL Express (1–3 pracovní dny) | podle země a hmotnosti |
| Kurýr DHL Economy Select (3–6 pracovních dnů) | podle země a hmotnosti |
Zboží skladem: odeslání do 1–2 pracovních dnů po připsání platby. Dodací lhůta zboží na objednávku je uvedena u produktu. Spotřebitel má 14denní právo na odstoupení – viz Vrácení a Záruka.
Doručujeme po celém světě s DHL Express (1–3 pracovní dny); cena závisí na zemi a hmotnosti zásilky.
Podobné produkty
Shelly Pro 1PM - for DIN rail mountable smart switch power consumption with measurement
Skladem