Apollo addressable input-output (I/O) module

The intelligent Input/Output Module is designed to monitor single-pole, volt-free contact inputs and to control relay outputs.

• Certified to EN 54-17 and EN 54-18
• Meets the failsafe requirements of BS 7273-4
• Ergonomic design for easier wiring and faster installation
• Suitable for both flush and surface mounting
• Compatible with XP95, Discovery and CoreProtocol (Soteria) systems

General

Manufacturer's recommended service life: 10 years

Mechanical Characteristics

Colour - White Weight - 244 g Dimensions: Length: 60 mm Width: 150 mm Depth: 90 mm

Relay output contact rating - 1 A Relay output rating tested - at 30 V AC

Compliance Standards

Standards

• EN 54-17
• EN 54-18

Certifications and Approvals

• FG
• LPCB
• SBSC
• BOSEC
• VdS
• CPR

Electrical Characteristics

Protocol voltage - 5 to 13 V Minimum protocol voltage - 5 V Maximum protocol voltage - 13 V Quiescent current - 500 μA (tested at 24 V DC) Supply voltage - 17 to 35 V DC Battery powered - No Switch-on surge current - 0.9 mA Relay contact rating - 1 A Contact rating tested - at 30 V

Status Indicators

• Polling/communication: flashing green
• Relay active: red
• Relay fault: steady yellow
• Input active: steady red
• Device fault: flashing yellow

Polarity

• L1 and L2 are polarity sensitive

Environmental Conditions

Humidity

• 0% to 95% RH
• No condensation or icing

Operating Temperature

• -40 °C to +70 °C

IP Rating

• IP52