Apollo Addressable I/O (I/O) Module

Intelligent input/output module (Input/Output Module) is designed for monitoring single-pole potential-free contact inputs and controlling relay outputs.

• Certified in accordance with standards EN 54-17 and EN 54-18
• Complies with BS 7273-4 failsafe requirements
• Ergonomic design for easier wiring and faster installation
• Suitable for both recessed and surface mounting
• Compatible with XP95, Discovery and CoreProtocol (Soteria) systems

General

Recommended service life by manufacturer 10 years

Mechanical Properties

Color — White
Weight — 244 g
Dimensions:
Length: 60 mm
Width: 150 mm
Depth: 90 mm

Relay output contact rated current — 1 A
Relay output rated current tested — at 30 V AC

Compliance Standards

Standards

• EN 54-17
• EN 54-18

Certificates and Approvals

• FG
• LPCB
• SBSC
• BOSEC
• VdS
• CPR

Electrical Properties

Protocol voltage — 5 to 13 V
Minimum protocol voltage — 5 V
Maximum protocol voltage — 13 V
Standby mode current — 500 μA (tested at 24 V DC)
Supply voltage — 17 to 35 V DC
Battery supply — No
Switch-on current surge — 0.9 mA
Relay contact rated current — 1 A
Contact rated current tested — at 30 V

Status Indicators

• Polling/linking: flashing green
• Relay active: red
• Relay fault: continuous yellow
• Input active: continuous red
• Device fault: flashing yellow

Polarity

• L1 and L2 are polarity sensitive

Environmental Conditions

Air Humidity

• 0% to 95% RH
• No condensation or freezing may occur

Operating Temperature

• -40 °C to +70 °C

IP Protection Class

• IP52