Apollo Soteria multisensorandur-detektor isolaatoriga (optiline+temperatuur)

• Guest houses / B&Bs
• Bedrooms
• Hospitals
• Hotels
• Medium and large-sized buildings
• Offices
• Parking garages and loading areas

Fire type

• Fast and slow burning fires

Mechanical properties

Colour – White
Finish – Glossy
Sensor configuration:

• Chamber with surface-mounted infrared emitter and prism. Integrated solid-state photodiode and amplifier
• Two open heat sensors (thermistors)

Weight – 96 g
Terminal material – Tinned stainless steel
Product diameter – 100 mm / 3.94 inches
Product height (without base) – 38 mm

Detection principle

• Photoelectric light scattering method
• Temperature sensitive resistance

Compliance standards

Standards

• EN 54-5
• EN 54-7
• EN 54-17

Certificates and approvals

• BOSEC
• FG
• LPCB
• SBSC
• VdS
• CPR

Operating properties

Analog value nominal – 23
Analog value tolerance – +4 / -0
Alarm level analog value – 55
Chamber type – PureLight

Electrical properties

Protocol voltage – 5 to 13 V peak-to-peak
Minimum protocol voltage – 5 V
Maximum protocol voltage – 13 V
Switch-on current surge – 0.56 mA
Standby current – 350 μA (tested at 24 V DC)

Status indicators

• Alarm: red
• Fault: flashing yellow
• Isolation: yellow
• Polling/link: green

Terminal functions

• +L2 — loop input/output positive
• -L1 in — loop input (isolated) negative
• -L1 out — loop output (isolated) negative
• +R — remote indicator positive connection
• -R — remote indicator negative connection

Polarity

• L1 and L2 are polarity sensitive

Environmental conditions

Air humidity

• 0% to 95% RH
• Condensation and freezing must not occur

Operating temperature

• -40 °C to +70 °C
• (-40 °F to +158 °F)

IP protection class

• IP44